1.  PRODUCT NAME

FOXHOLE COVER

2.  PRODUCT Nos. - 5611730 BLACK and 5611740 WHITE

3.  MANUFACTURER

Yemm & Hart Ltd
1417 Madison 308
Marquand  MO  63655-9153  USA
Tel: 573-783-5434    Fax 573-783-7544
Email: yemmhart@earthlink.net
Web: www.yemmhart.com

4.  PRODUCT DESCRIPTION

The Military Foxhole Cover is a 1/2" (12.7 mm) single unit, extruded polyethylene plastic panel, thermoformed into a round 63" (1600.2 mm) shape that covers the top of a vertically buried concrete pipe used as a foxhole lining. The thermoformed cover is convex shaped, or slightly domed upwards by 8" (203.2 mm) to shed water and support the weight of a 50# sandbag to keep wind from lifting the cover off. When installed, the Military Foxhole Cover includes a 2" (50.8 mm) lip that extends downwards around the outside of the concrete pipe foxhole lining.

5.  APPLICATIONS

The Military Foxhole Cover was designed to cover a firing range training foxhole to prohibit, rain, snow, ice, sand, soil and other debris from entry during times of non-use.

6.  INSTALLATION

The Military Foxhole Cover is placed by hand over the horizontal exposed end of a concrete pipe. It is removed by hand.

7.  STORAGE

The Military Foxhole Covers may be stacked on a 68" x 68" (1727.2 mm x 1727.2mm) pallet for temporary or long term storage to a recommended height of 20 units.

8.  SPECIFICATIONS

Nominal Interior Dimensions: 62" (1574.8 mm) diameter x 7.5" (190.5 mm) high measuring from the bottom edge of the lip to top of dome.
     Interior height dimension includes the lip which is 2" (50.8mm)
Material Gauge or Thickness: 1/2" (12.7mm)
Nominal Exterior Dimensions: 63" (1600.2 mm) diameter x 8" (203.2 mm) high
     Exterior height dimension includes the lip which is approximately 2.5" (63.5 mm)
Interior and exterior edges of the saw trimmed lip are deburred to remove sharp corners.
Unit Weight 62 Lbs (23 kg).
The Military Foxhole Covers can be made in black or white and have Ultra Violet Inhibitor added to increase the life of the polyethylene material. The color black is naturally UV resistant and will give the longest service life.

9.  LEAD TIME

The Military Foxhole Cover manufacturing lead time depends upon the size of the order. It takes approximately 3 weeks to extrude the polyethylene sheet material and the thermoforming rate is 10 to 15 units per day.

10.  IDENTIFICATION LABEL INFORMATION -

11.  PACKING

The Military Foxhole Cover will weigh approx. 62 Lbs (23 kg). One palletized stack of 20 will weigh approx. 1340 Lbs (500 kg). Covers will be stacked on a pallet measuring 68" x 68", weighing approx 100 Lbs (37 kg). Stacked covers are interleaved with foam padding, stretch wrapped and banded together with protection from abrasion.

12.  TRANSPORT

The Military Foxhole Cover is shipped freight class 70. The most economical method is via flatbed truck for side unloading on skids containing stacks of the covers. The load is to be tarped. Van transport is also available but normally requires a truckload rate.

13.  MAINTENANCE

Maintenance of the Military Foxhole Cover is not necessary. However, they can be cleaned with a brush and water or high pressure spray.

14.  WARRANTY

Yemm & Hart Ltd warrants The Military Foxhole Cover to be free from manufacturing defects and to perform as intended for a period of 5 YEARS from the date of receipt by the customer.

15.  END OF SERVICE LIFE

At the end of a Military Foxhole Cover's useful service life, Yemm & Hart Ltd will assist in having them recycled.

16.  OPTIONS

The Military Foxhole Cover can be made in other sizes and other colors besides black and white. Other sizes will add approximately 4 weeks to the manufacturing lead time. For both the size and color options, it is generally not cost effective for the customer in unit quantities of less than 500.

17. CAUTIONS

Prices and availability may change without notice. The thermoforming method of molding of polyethylene is approximate and should not be confused with the roto-molding or injection molding methods. The customer is responsible for determining the suitability of these products for their applications.